We are continuing to make progress on shipping the MultispeQ v1.0. We now have the first 20 devices from the factory. These are exactly (!) like the ones we’ll ship to those who pre-ordered. And we now have all parts in stock to complete all orders and then some.
We are now evaluating these initial 20 devices, adjusting our existing calibration routines, and field testing them to make they hit our high standards. We did as much of the testing as possible prior to receiving these 20 devices on hand-built versions with 3D printed cases, but due to small changes in manufacturing it wasn’t possible to finish all calibration routines and test all tolerances. Here’s two such examples: 1) 3D printed cases are notoriously slopped in comparison to injection molded ones, so mechanical components needs to be retested (like the bushings for the clamp mechanism); 2) the case material (ABS) has a different light absorptivity than the 3D printed cases we used before, and that changes the absorption and chlorophyll content calibrations.
In addition, we’re fixing some good old fashioned errors, like we ordered a bluetooth module but were shipped the wrong one (currently being reordered), and the USB 3.0 port wasn’t soldered on the board completely, causing confusion during initial calibration (a new soldering routine is being developed by the factory).
These aren’t excuses, but hopefully give you a sense of the kind of troubleshooting and persistence that’s required to get something that works consistently 🙂
Once we’re comfortable with these 20 devices, we will manufacture the remaining devices and ship. We have about 2 more weeks until the final parts we had to re-order come in, and it will probably take a few more weeks to complete the calibration and final testing before shipping. But we won’t ship anything until we’re completely comfortable with the device and it’s efficacy.
We apologize for the long delays, we know it can be both nerve racking and frustrating. We are getting there, and we think you’ll be happy with the result. Thanks for your patience and support!
Learn the MultispeQ v1.0 and the PhotosynQ platform.
This is a 3 day intensive workshop to learn and share best practices, experimental design, data analysis, and hardware modification on devices in the PhotosynQ platform with a focus on the MultispeQ v1.0 device.
Dates: Oct 14 – 16, 2016
Location: East Lansing MI
We already have a great group of attendees with backgrounds in plant breeding, plant science, arboriculture, and citizen science from academia and the private sector. Join us!
To keep the workshop small and personal, tickets are limited so sign up soon.
We have some updated numbers on manufacturing. I’m providing these in an overabundance of sharing, but recognize (if you don’t already) that manufacturing numbers are never that tight. Things come up. Things break. Shit happens. So take this with a healthy dose of scepticism and a small dash of hope. That’s what I do.
All circuit board and case designs are finalized (ie no more changes!).
Our mold maker estimates 3 weeks for case molds, + 1 week for testing
Other parts with long lead times are down to 8 business days (~2 weeks), including light guides and 2 rubber molded parts.
From final assembly, It will take us at least a week to test a small batch (~20) of these devices to confirm our calibration routines are working as expected, and determine if the variation is within out specifications.
From that point, it will take another week or two to produce, pack, and ship the first 500 devices.
Our software (desktop app, android app, and website) are working with the new device, so no limitations there.
What does this all mean? It means we are at a minimum 6 weeks to shipping devices. Argh…
It’s not all gloom and doom though. Next post I’m going to show our progress, how quickly you can take measurements, and how effective those measurements can be. It’s exciting stuff. Stay tuned.
Well, it’s July and you still don’t have units. That’s our fault, we’re learning as we go and you’re the one who is impacted by that process, and we’re sorry. We have tested several complete working prototype V1.0 devices in the field, thousands of measurements, and they work great (almost better than expected), and I think you’re really going to like them. So that’s a plus. But if devices aren’t in your hands when you need them this doesn’t amount to a hill of beans.
Right now, we are still at a minimum a month away, probably more. We’re doing everything we can to speed up the process – that includes 1) rush ordering circuit boards, 2) working directly with (ie setting up shop at) the manufacturer to try to reduce lag time to troubleshoot questions about the circuit board, 3) and ordering/preparing everything we possibly can before we have final circuit boards are completed.
We’ve been collecting a lot of data here on test plots, and we’ll be sharing what we see so far soon. I hope this will give you peace of mind – it certainly does for me 🙂
We’re working really hard to get these things out, and we really appreciate your patience and support,
Lots of software changes and improvements, and more on the way. Here’s a list of what’s going on.
Creating a project has changed!
First, we completely revamped how you create a new project. We’ve consolidated the photosynthesis measurements and chlorophyll content measurement into the same protocol to make it easier to find and order. This new protocol is called “Leaf Photosynthesis” – please use it! For existing users – NOTE! Please use the new protocol, but if you absolutely need to find the old protocols (The One v3.0 and Chlorophyll Content III or any others) you can always go to the ‘advanced’ screen for the old interface.
You email invite people to join your project as collaborators or administrators, and have multiple administrators to share the workload of writing results or adding or editing questions.
You can add multiple images to your project and higher quality descriptions. And there’s tags and categories so other like-minded people can find you and you find them.
We found that directions was underused, so we removed the directions box. Don’t worry, we’re going to put directions back in later in a much more useful form, but for now if you have directions for collaborators put that in the “Descriptions” box.
Android App bugs fixed + new features
The android app (to be released next week) also has some updates. An improved data display screen, better bluetooth connection screens, and a new history feature. History keeps track of every data point you have collected, so you can identify mislabelled measurements and track your progress through the field. In the “settings” tab, you can set the app to wait before sending the measurements to the cloud – giving you the chance to delete bad or mislabelled measurements at the end of a day of collecting data. Once your confident the data is correct and you’ve remeasured if necessary, you can push the data to the cloud. No more spending months trying to track mistakes by data collectors you can’t contact anymore!
Finally, both apps now automatically stay up-to-date with the website, so no more syncing when you change a project or protocol! The entire platform should be up to date, all the time – ensuring that as you and other project partners make improvements everyone data, projects, protocols, and discussions are current.
We have a lot of additional news on the hardware front, but I’m waiting for more data to come in before posting about it – so expect that soon.
We had our first PhotosynQ day-long workshop on April 22nd at Michigan State. We had over 90 attendees, 9 breakout sessions ranging from education to data analysis, and posters from 12 beta testers. You can see almost all of the main and breakout sessions on our YouTube Channel.
We discussed everything from abiotic stress, what photosynthesis parameters mean (there’s a nice overview by Professor David Kramer in there which I’d suggest), the new features coming in the MultispeQ V1.0, alternative uses of the platform for microbial detection and measuring coral bleaching, use of the MultispeQ in Africa, and lots lots more. Definitely check it out!